Product Description

Klindex Polish KP85 is a professional‑grade polishing powder formulated for marble and other calcium‑carbonate stones. Its fine abrasive and chemical reaction blend creates a deep, reflective gloss while removing surface dullness, light stains, and embedded dirt.

According to the Klindex technical sheet, KP85 is a polishing powder for marble and stones containing calcium carbonate, applied by spreading the powder under a felt pad and adding only the minimum water needed to form a dense mud. The document also warns that using too much water prevents the marble from heating, slowing down the polishing process, and that the powder must never be left on the surface without rinsing because it may remove the gloss.

KP85 is widely used in hotels, malls, commercial buildings, and residential spaces for both restoration and maintenance cycles. It delivers fast results and a long‑lasting shine when used with a rotary machine and the correct pads.

Key Features

• Professional polishing powder for marble & calcareous stones
• Produces a brilliant, mirror‑like gloss
• Removes light stains, dullness, and embedded dirt
• Works with felt, Discolux, or white pads
• Fast‑acting formula for restoration and maintenance
• Suitable for honed or lightly textured surfaces
• Available in 1 kg, 5 kg, and 20 kg

Where to Use

• Marble floors
• Marble countertops
• Calcium‑carbonate stones
• Commercial lobbies & corridors
• Hotels, restaurants, malls
• Residential marble surfaces

(Note: The official TDS does not list granite, ceramic, porcelain, or glass as compatible surfaces. It specifically states it is for marble and stones containing calcium carbonate.)

How to Apply

(All steps aligned with the Klindex technical sheet)

• Spread a small amount of KP85 under the felt pad
• Add only the minimum water needed to create a dense mud
• Polish a small area at a time using a rotary machine
• Rinse thoroughly with clean water after polishing
• Do not leave powder on the floor without rinsing — it may remove the gloss

Important Notes

• Using too much water reduces heat and slows polishing
• Never leave powder on the surface without rinsing
• Always test on a small area before full application

Coverage

Approx. 100 g per working area (varies by surface condition and porosity).

Safety & Handling

The technical sheet lists the following hazards:

• Harmful if swallowed or in contact with skin
• Causes serious eye damage
• Contains Potassium Oxalate and Oxalic Acid

Wear: gloves, protective clothing, and eye protection. Store in a cool, dry place. Keep out of reach of children.

Technical Specifications